mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. m630x series 5x7 mm, 1.8/2.5/3.3 v, lvpecl/lvds/cml/cmos, tcxo/tcvcxo features: superior jitter performance ? (comparable to saw based) frequencies from 50 mhz to 1.4 ghz ? designed for a short 2 week cycle time ? applications: telecommunications such as sonet / ? sdh / dwdm / fec / serdes / oc-3 thru oc-192 wireless base stations / wlan / ? gigabit ethernet avionic fight controls and military ? communications rev: 10/14/2013 ordering information m6300 2 j b v p n 00.0000 mhz product series m6300 = 3.3 v m6301 = 2.5 v m6302 = 1.8 v temperature range 1: 0 c to +70 c 3: -55 c to +105 c 6: -20 c to +70 c 4: -55 c to +125 c 2: -40 c to +85 c stability g: 0.5 ppm j: 1.0 ppm k: 2.0 ppm h: 2.5 ppm l: 4.6 ppm e: 10 ppm enable/disable function b: enable high (pad 1) g: enable high (pad 2) s: enable low (pad 1) m: enable low (pad 2) u: no enable/disable function output type f: no voltage control (tcxo) v: voltage control (tcvcxo) output waveform p: lvpecl l: lvds m: cml c: cmos package/lead configurations n: leadless ceramic (9 pad) c: leadless ceramic (6 pad) frequency (customer specified) m6300sxxx, m6301sxxx & m6302sxxx - custom datasheets. temperature vs. stability pin 1 enable pad 1: enable/disable pad 2: n/c pad 3: gnd pad 4: output q (lvpecl, lvds, cml, cmos) pad 5: output q (lvpecl, lvds, cml) pad 6: v cc 0.5 ppm 1.0 ppm 2.0 ppm 2.5 ppm 4.6 ppm 0 c to +70 c a a a a a -20 c to +70 c n a a a a -40 c to +85 c n a a a a -55 c to +105 c n n n n a -55 c to +125 c n n n n a a = available n = contact factory pin 2 enable pad 1: n/c, v control pad 2: enable/disable pad 3: gnd pad 4: output q (lvpecl, lvds, cml, cmos) pad 5: output q (lvpecl, lvds, cml) pad 6: v cc
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. m630x series 5x7 mm, 3.3/2.5/1.8 volt, lvpecl/lvds/cml/cmos, tcxo/tcvcxo parameter symbol min. typ. max. units conditions/notes frequency range f r 50 1400 mhz lvpecl, lvds, cml (see note 1) 50 135 mhz cmos initial accuracy f i -1 +1 ppm @ +25 c frequency stability ? f t /f ppm (fmax - fmin)/2 (see note 2) frequency vs. aging ? f time /f -3 +3 ppm first year -1 +1 ppm thereafter (per year) frequency vs. supply voltage ? f vdd /f 0.40 ppm 5% voltage variation frequency vs. reflow 0.75 ppm 2 reflows max. frequency vs. load ? f load /f 0.20 ppm 5% supply voltage variation operating temperature t a c storage temperature t stg -55 +125 c operating voltage v cc /v s /v dd 3.135 3.3 3.465 v m6300 2.375 2.5 2.625 v m6301 1.71 1.8 1.89 v m6302 operating current i cc 125 ma lvpecl 100 ma lvds 110 ma cml 90 ma cmos rise/fall time t r /t f 0.35 ns lvpecl, lvds, cml 6 ns cmos logic ?1? level v oh v cc - 1.02 v lvpecl 90 % v dd cmos logic ?0? level v ol v cc - 1.63 v lvpecl 10 % v dd cmos common mode output voltage v cm 1.2 v lvds symmetry (duty cycle) t dc 45 55 % @ 50% v dd (cmos) 45 55 % @ 50% of waveform (lvpecl) 45 55 % @ 1.25 v (lvds) output voltage level 0.7 0.95 1.2 v pk-pk cml tuning range 5 ppm vctcxo only (see note 3) voltage control range v c 0.18 0.90 1.62 v @ 1.8 v supply (vctcxo only - pad 2) 0.25 1.25 2.25 v @ 2.5 v supply (vctcxo only - pad 2) 0.30 1.65 3.00 v @ 3.3 v supply (vctcxo only - pad 2) output skew 20 ps lvpecl 15 ps cml 20 ps lvds output load lvpecl (see note 4) lvds, cml (see note 4) cmos (see note 4) enable/disable function 80 % output enabled (option b or g) 0.5 v output disabled enable/disable function 0.5 v output enabled (option s or m) 80 % output disabled phase noise (typical) 10 hz 100 hz 1 khz 10 khz 100 khz offset from carrier @ 622.080 mhz (lvpecl) -60 -90 -120 -127 -133 dbc/hz @ 100.000 mhz (hcmos) -70 -103 -123 -131 -136 dbc/hz @ 50.000 mhz (hcmos) -77 -109 -129 -137 -141 dbc/hz shock vibration solderability hermeticity thermal shock thermal cycle note 4: refer to the load circuit diagram in this data sheet. environmental 1 x 10 -8 atm cc/sec of helium (crystal only) per mil-std-883, method 1011, condition a per mil-std-883, method 1010, condition b per mil-std-202, methods 201 & 204 per eiaj-std-002 per mil-std-202, method 213, condition c see ordering information note 1: contact factory for frequencies over 945 mhz. note 2: contact factory for less than 1 ppm frequency stability. note 3: contact factory for other tuning range options. electrical specifications v dc 100 differential 15 pf see ordering information 50 to (v cc - 2)
mtronpti reserves the right to make changes to the product(s) and service(s) described herein without notice. no liability is assumed as a result of their use or application. please see www.mtronpti.com for our complete offering and detailed datasheets. contact us for your application specifc requirements: mtronpti 1-800-762-8800. load circuit diagrams lead free solder profle
|